Pneumatic Rubber Fender, whale brand 50KPA / 80KPA Marine Pneumatic
rubber fender with Certification
|Name:||Pneumatic Rubber Fender|
|Inner pressure||50KPA 80KPA other can be supplied as required|
|Type||sling type defense type chain-net type|
|Certification||IACS KR LR BV NK ABS DNV CCS...|
|Function||ship to ship|
|Surface||Black painted or as required|
Pneumatic Rubber Fender
(1) High energy absorption
The amount of energy absorbed is the main technical performance
indicators fender instruments. With the ship's tonnage growth,
berthing operations, ship collision energy contact quay or other
ships also doubled. Huge collision energy must rely on the contact
area on the fender and enough to absorb sufficient deformation.
Aohai rubber ship fender use compressed air as the buffer medium to
absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of pneumatic fenders is low pressure gas, the
internal pressure increase is very limited during compression
deformation. Due to the large contact area, unit pressure acting on
the ship hull surface is very low, compared with other fender
instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of
contacting the side of the shore. As the inclined interface of sea
inflatable fender, its adaptability is much higher than other
(4)Floating performance is good, not subject to tidal influence,
fender can be maintained in the ideal level
Pneumatic fenders floating on the water surface (more than 50% of
the volume), along with the change of position is not relative to
the tidal fluctuation. Especially the ship as the waves rolling,
cylindrical inflatable fenders with rolling, the friction force is
very small. So it will not damage the coating surface of the hull,
and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and
alkali resistance, oxidation resistance, not easy to rust.
Aohai Marine Fittings Co., Ltd belong to Aoahai Group, is invested
by Aohai Anchor Chain Factory, total investment is over $180
million. We supply products for Offshore Project, Quay Construction
and Shipbuilding Industry. We currently have more than 600 stuff,
including 75 engineers and management, 25 international trade
personal, 19 QA engineers.
Our main production equipment include 5# , 7#, 9#, 11# chain
automation anchor manufacturing machine,
steel mooring buoy manufacturing production line,
3 sets of rubber fender production line, heat treatment machine,
load test machine and shot blasting machine.
Meanwhile, we are sales representative of other big factories,
products mainly include Pneumatic Rubber Fenders, Marine Mooring
Ropes, Deck Out-fittings and Steel Wire Ropes.
We are ISO9001 Quality Control System approval, and approved by
ABS, BV, LR, DNV, GL, NK, KR, CCS, RINA and other IACS class
Any inquiry please contact:
Whatsapp: +86-17753210369 / 15092012575
Website: www. anchorchaincn.com / www.aohaimarine.com